C&J Building Products

Menu
Call Us

Exit Devices

Heavy Duty Stainless Steel Exit Devices

  • Meets & Exceeds ANSI A156.3 – Grade 1 Standards
  • UL Listed for Panic Exit Hardware
  • Meets ADA requirements ANSI A117.1 with Lever Trim
  • Heavy Duty Extruded Anodized Aluminum Channel & Steel Chassis
  • 5/32″ Hex Key Dogging Standard on Panic Exit Hardware
  • Cylinder Dogging Conversion Kits available for new or existing exit devices
  • Device Lengths: 33″ for 3′-0″ wide doors and 42″ for 3-8″ to 4′-0″ wide doors
  • Center Case Dim: 8″ Height x 2 7/8″ Wide x 2 13/16″ Thick – 4 1/2″ Minimum stile required
  • Mechanism Case Dim: 2 3/16″ Height x 2 3/16″ Wide
  • Projection: 3 3/8″ Undogged – Pushbar Neutral & 2 13/16″ Dogged – Pushbar Depressed
  • Limited Lifetime Warranty

Heavy Duty Stainless Steel RIM Exit Device

  • UL Listed for “A” Label 3-Hour Fire Doors
  • Non Handed – Completely Reversible
  • Finishes: US3, US4 , US10B, US26 & US32D on Headcover, Pushbar & End Cap
  • Deadlocking latchbolt with 5/8″ projection
  • Roller Stike with 5/8″ projection & 1/8″ shim
  • Min. Door Width: 33″ & 42″ devices can be cut down to fit on 2-8″ wide door
  • Fasteners: Wood, Machine & Self Tapping Machine Screws (F1000R includes thru bolts)
  • Trim & Accessories: ASA & latch fillers included, Exterior Trims, Shim Kits & other accessories available
  • Alarmed Exits: Exit Alarm Kit ALK-1000 available for new or existing devices
  • Electrification: ELR – Electric latch retraction, ED – Electric dogging, REX – Request to exit, LBM – Latch bolt monitoring available
1000R

Heavy Duty Stainless Steel Surface Vertical Rod Exit Device

  • UL Listed for “A” Label 3-Hour Fire Doors to 8′-0″ x 10′-0″ (Bottom Rod required)
  • Easily Re-handed in the field – Shipped as RHR
  • Finishes: US3, US4, US10B, US26, US32D
  • U U-shaped top Latch for Secure Engagement with strike (not electric strike compatible)
  • Drop Bolt Style Bottom Latch Secures into flat strike & hole in the floor
  • Min. Door Width: 33″ & 42″ devices can be cut down to fit on a minimum door width of 2′-8″
  • Door Heights: 7″-0″ Standard – Extended Top Rods available for up to 10′-0″ tall doors
  • Fasteners: Wood, Machine & Self Tapping Machine Screws (F1000V includes thru bolts)
  • Trim & Accessories: Latch filler included, Exterior Trims, Shim Kits, and other accessories available
  • Electrification: Electric latch retraction, Electric Dogging, Request to exit, Latch bolt monitoring
  • Undercut: 1/4″ door undercut recommended for 1/4″ threshold or no threshold openings
1000V

Medium Duty Stainless Steel Exit Devices

  • UL Listed for Panic Exit Hardware
  • Meets ADA requirements ANSI A117.1 with Lever Trim
  • Roll Formed Steel or Stainless Steel Channel & Steel Chassis
  • Steel or Stainless Steel Headcover & End Cap
  • Finishes: Aluminum, Dark Bronze, Gold Painted & US32D
  • 5/32″ Hex Key Dogging Standard on Panic Exit Hardware
  • Device Lengths: 33″ for 3′-0″ wide doors and 42″ for 3-8″ to 4′-0″ wide doors
  • Center Case Dim.: 6″ Height x 2 5/16″ Wide x 2 1/2″ Thick – 4″ Minimum stile required
  • Mechanism Case Dim.: 1 5/8″ Height x 1 13/16″ Wide
  • Projection: 2 1/2″ Undogged – Push bar Neutral & 1 13/16″ Dogged – Push bar Depressed
  • Limited Lifetime Warranty

Medium Duty Stainless Steel RIM Exit Device

  • Meets ANSI A156.3 – Grade 1 Standards
  • UL Listed for “A” Label 3-Hour Fire Doors
  • Non Handed – Completely Reversible
  • Deadlocking latchbolt with 5/8″ projection
  • Roller Strike with 5/8″ projection with 1/8″ shim
  • Min. Door Width: 33″ & 42″ devices can be cut down to fit on 2-4″ wide door
  • Fasteners: Wood, Machine & Self Tapping Machine Screws (F2000R includes thru bolts)
  • Trim & Accessories: ASA & latch filler included, Exterior Trims, Shim Kits, and other accessories available

Medium Duty Stainless Steel Surface Vertical Rod Exit Device

  • Meets & Exceeds ANSI A156.3 – Grade 1 Standards
  • UL Listed for “A” Label 3 Hour Fire Doors to 8′-0″ x 10′-0″
  • Easily Re-handed in the field – Shipped as RHR
  • U-Shaped Top Latch for Secure Engagement with strike
  • Drop Bolt Style Bottom Latch Secures into flat strike & hole in the floor
  • Min. Door Width: 33″ & 42″ devices can be cut down to fit on a minimum door width of 2′-4″
  • Door Heights: 7″-0″ Standard – Extended Top Rods available for up to 10′-0″ tall doors
  • Fasteners: Wood, Machine & Self Tapping Machine Screws (F2000V includes thru bolts)
  • Trim & Accessories: Latch filler included, Exterior Trims, Shim Kits, and other accessories available
  • Undercut: ¼” door undercut recommended for ¼” threshold or no threshold openings

Exit Devices

1000 Series

(information applies to both 1000R and 1000V)
  • Meets & Exceeds ANSI A156.3 – Grade 1 Standards
  • UL Listed for Panic Exit Hardware
  • Meets ADA requirements ANSI A117.1 with Lever Trim
  • Heavy Duty Extruded Anodized Aluminum Channel & Steel Chassis
  • 5/32″ Hex Key Dogging Standard on Panic Exit Hardware
  • Cylinder Dogging Conversion Kits available for new or existing exit devices
  • Device Lengths: 33″ for 3′-0″ wide doors and 42″ for 3-8″ to 4′-0″ wide doors
  • Center Case Dim: 8″ Height x 2 7/8″ Wide x 2 13/16″ Thick – 4 1/2″ Minimum stile required
  • Mechanism Case Dim: 2 3/16″ Height x 2 3/16″ Wide
  • Projection: 3 3/8″ Undogged – Pushbar Neutral & 2 13/16″ Dogged – Pushbar Depressed
  • Limited Lifetime Warranty

1000R Rim

  • 1000RUL Listed for “A” Label 3 Hour Fire Doors
  • Non Handed – Completely Reversible
  • Finishes: US3, US4 , US10B, US26 & US32D on Headcover, Pushbar & End Cap
  • Deadlocking latchbolt with 5/8″ projection
  • Roller Stike with 5/8″ projection & 1/8″ shim
  • Min. Door Width: 33″ & 42″ devices can be cut down to fit on 2-8″ wide door
  • Fasteners: Wood, Machine & Self Tapping Machine Screws (F1000R includes thru bolts)
  • Trim & Accessories: ASA & latch fillers included, Exterior Trims, Shim Kits & other accessories available
  • Alarmed Exits: Exit Alarm Kit ALK-1000 available for new or existing devices
  • Electrification: ELR – Electric latch retraction, ED – Electric dogging, REX – Request to exit, LBM – Latch bolt monitoring available

1000V Surface Vertical Rod

  • 1000VUL Listed for “A” Label 3 Hour Fire Doors to 8′-0″ x 10′-0″ (Bottom Rod required)
  • Easily Re-handed in the field – Shipped as RHR
  • Finishes: US3, US4, US10B, US26, US32D
  • U Shaped Top Latch for Secure Engagement with strike (not electric strike compatible)
  • Drop Bolt Style Bottom Latch Secures into flat strike & hole in the floor
  • Min. Door Width: 33″ & 42″ devices can be cut down to fit on minimum door width of 2′-8″
  • Door Heights: 7″-0″ Standard – Extended Top Rods available for up to 10′-0″ tall doors
  • Fasteners: Wood, Machine & Self Tapping Machine Screws (F1000V includes thru bolts)
  • Trim & Accessories: Latch filler included, Exterior Trims, Shim Kits other accessories available
  • Electrification: Electric latch retraction, Electric Dogging, Request to exit, Latch bolt monitoring

  • Under Cut: 1/4″ door under cut recommended for 1/4″ threshold or no threshold openings

2000 Series

(information applies to both 2000R and 2000V)
  • UL Listed for Panic Exit Hardware
  • Meets ADA requirements ANSI A117.1 with Lever Trim
  • Roll Formed Steel or Stainless Steel Channel & Steel Chassis
  • Steel or Stainless Steel Headcover & End Cap
  • Finishes: Aluminum, Dark Bronze, Gold Painted & US32D
  • 5/32″ Hex Key Dogging Standard on Panic Exit Hardware
  • Device Lengths: 33″ for 3′-0″ wide doors and 42″ for 3-8″ to 4′-0″ wide doors
  • Center Case Dim.: 6″ Height x 2 5/16″ Wide x 2 1/2″ Thick – 4″ Minimum stile required
  • Mechanism Case Dim.: 1 5/8″ Height x 1 13/16″ Wide
  • Projection: 2 1/2″ Undogged – Push bar Neutral & 1 13/16″ Dogged – Push bar Depressed
  • Limited Lifetime Warranty

2000R AL Rim Exit Device Device

  • 2000RMeets ANSI A156.3 – Grade 1 Standards
  • UL Listed for “A” Label 3 Hour Fire Doors
  • Non Handed – Completely Reversible
  • Deadlocking latchbolt with 5/8″ projection
  • Roller Strike with 5/8″ projection with 1/8″ shim
  • Min. Door Width: 33″ & 42″ devices can be cut down to fit on 2-4″ wide door
  • Fasteners: Wood, Machine & Self Tapping Machine Screws (F2000R includes thru bolts)
  • Trim & Accessories: ASA & latch filler included, Exterior Trims, Shim Kits other accessories available

2000V Surface Vertical Rod

  • 2000VMeets & Exceeds ANSI A156.3 – Grade 1 Standards
  • UL Listed for “A” Label 3 Hour Fire Doors to 8′-0″ x 10′-0″
  • Easily Re-handed in the field – Shipped as RHR
  • U Shaped Top Latch for Secure Engagement with strike

  • Drop Bolt Style Bottom Latch Secures into flat strike & hole in the floor

  • Min. Door Width: 33″ & 42″ devices can be cut down to fit on minimum door width of 2′-4″

  • Door Heights: 7″-0″ Standard – Extended Top Rods available for up to 10′-0″ tall doors

  • Fasteners: Wood, Machine & Self Tapping Machine Screws (F2000V includes thru bolts)
  • Trim & Accessories: Latch filler included, Exterior Trims, Shim Kits other accessories available
  • Undercut: ¼” door undercut recommended for ¼” threshold or no threshold openings

Images courtesy of Design Hardware