Hinges
BB5 Hinges
Standard Weight Ball Bearing Hinges
- Brush Chrome Finish – In Stock
- Other Finishes – Special Order
- Meets ANSI A156.1 – Dimensions and tolerances conform to ANSI – A156.7
- .134″ +/- .005″ on 4.5″ x 4.5″ size & .145″ +/- .005″ on 5″ x 4 1/2″ size
- Steel (ANSI A8112) or Stainless Steel (Grade 304)(ANSI A5111)
- Marine Grade 316 US32D Stainless Steel also available
- 5 Knuckle Design & Templated hole locations for wood or metal doors & frames
- Approved for most types of fire doors up to 4′ x 10′, 8′ x 10′ pairs – Refer to NFPA80
- 1/16″ Swage standard which provides 1/16″ of clearance between leaves
- NRP – Non removable pin available upon request
- Equipped with easily seated non-rising pin with button head
- The hole in bottom knuckle tip enables quick pin removal for ease of installation
- Each hinge has two sets of maintenance-free non non-detachable ball bearings
- Concealed through wire and monitoring options available. See electrified section
- Each box of 3 hinges contains full set of machine and wood screws
- Limited Lifetime Warranty
Heavy Weight Ball Bearing Hinges
- Meets & Exceeds ANSI – A156.13, Series 1000, Grade 1 Standards
- UL Listed for “A” Label 3-Hour Fire Doors, Singles or Pairs
- Meets ADA and ANSI A117.1 accessibility codes with lever trim
- Lock Case: Heavy Gauge Plated Steel, Zinc dichromated for Corrosion Resistance
- 5″ Full Length Levers are Forged Brass or Stainless Steel
- Trim Options: 2 1/4″ x 8 1/8″ Cast Escutcheon or 3″ Wrought Brass Roses
- Independent lever return springs to prevent lever sag
- Thru bolted Lever or Knob trim for increased security
- Handed as RHR – Easily Rehanded in the field
- 2 3/4″ backset
- Armored Front is Wrought Stainless Steel or Brass 1 1/4″ x 8″
- Stainless Steel 3 Piece Anti Friction Latch bolt with 3/4″ projection
- Non handed Stainless Steel Deadlocking Deadlatch
- 1″ Throw Deadbolt, Stainless Steel with a Anti-Saw Pins
- 6 Pin Brass mortise cylinder, C Kwy, with 2 Keys std, Prepared for Small format IC core (less core)
- Optional: 11 popular competitor keyways available with replacement cylinders
- Strike: 4 7/8″ x 1 1/4″ ASA non handed with large rectangular cut out
- 1 3/4″ Door Thickness Standard, other thicknesses available when specified
- Lever Styles: Flat (standard, shown above), Curved, Half Curved, Tubular, Ball Knob
- Finishes: US26D in stock with Flat lever
- Special Order Finishes: US3, US4, US10, US10B, US26, US32, US32D
- Fasteners: Combination screws for wood or metal doors & frames
- Electrified Options: 12 or 24 Volt (AC/DC) Fail Safe (Electrically Locked), Fail Secure (Electrically Unlocked), REX Request to Exit, LM – Latch Monitor, SM – Security Monitor of latch & solenoid
- Limited Lifetime Warranty
Continuous Geared Hinges
Commercial Hinges
- 6063 T6 Aluminum Alloy
- Full Mortise & Full Surface
- Non Handed (unless cut in the field)
- 83″ and 95″
- AL = Aluminum Anodized and BZ = Dark Bronze Anodized
Anodizing is done after machining to help reduce wear - Templated hole patterns
- 12-24×7/8″ Self tapping machine screws
- 32 self-lubricating concealed bearings per hinge for heavy-duty applications
- Eliminates door sag and binding
- Adds a higher degree of security over standard hinges
- Low operating force helps opening to meet ADA
- Adds reinforcement to both door and frame
- 10 Year Warranty
Hinges
BB5 Hinges
Standard Weight Ball Bearing Hinges
Brush Chrome Finish – In Stock
Other Finishes – Special Order
- Meets ANSI A156.1 – Dimensions and tolerances conform to ANSI – A156.7
- .134″ +/- .005″ on 4.5″ x 4.5″ size & .145″ +/- .005″ on 5″ x 4 1/2″ size
- Steel (ANSI A8112) or Stainless Steel (Grade 304)(ANSI A5111)
- Marine Grade 316 US32D Stainless Steel also available
- 5 Knuckle Design & Templated hole locations for wood or metal doors & frames
- Approved for most types of fire doors up to 4′ x 10′, 8′ x 10′ pairs – Refer to NFPA80
- 1/16″ Swage standard which provides 1/16″ of clearance between leaves
- NRP – Non removable pin available upon request
- Equipped with easily seated non-rising pin with button head
- Hole in bottom knuckle tip enables quick pin removal for ease of installation
- Each hinge has 2 sets of maintenance free non detachable ball bearings
- Concealed thru wire and monitoring options available, See electrified section
- Each box of 3 hinges contains full set of machine and wood screws
- Limited Lifetime Warranty
BB5 – HW Hinges
Heavy Weight Ball Bearing Hinges
Brush Chrome Finish – In Stock
Other Finishes – Special Order
- Meets ANSI A156.1 – Dimensions and tolerances conform to ANSI – A156.7
- .180″ +/- .005″ on 4.5″ x 4.5″ size & .190 +/- .005″ on 5″ x 4.5″ size
- Steel (ANSI A8112) or Stainless Steel (Grade 304)(ANSI A5112) Marine Grade 316 US32D Stainless Steel also available
- 5 Knuckle Design & Templated hole locations for wood or metal doors & frames
- Approved for most types of fire doors up to 4′ x 10′, 8′ x 10′ pairs – Refer to NFPA80
- 1/16″ Swage standard which provides 1/16″ of clearance between leaves
- NRP – Non removable pin standard on all BB5-HW hinges
- Equipped with easily seated non-rising pin with button head
- Hole in bottom knuckle tip enables quick pin removal for ease of installation
- Each hinge has 4 sets of maintenance free non detachable ball bearings
- Concealed thru wire and monitoring options available, See electrified section
- Each box of 3 hinges contains full set of machine and wood screws
- Limited Lifetime Warranty
Continuous Geared Hinges
Commercial Hinges
- 6063 T6 Aluminum Alloy
- Full Mortise & Full Surface
- Non Handed (unless cut in the field)
- 83″ and 95″
- AL = Aluminum Anodized and BZ = Dark Bronze Anodized Anodizing is done after machining to help reduce wear
- Templated hole patterns
- 12-24×7/8″ Self tapping machine screws –32 Self lubricating concealed bearings per hinge for heavy duty applications –Eliminates door sag and binding –Adds higher degree of security over standard hinges –Low operating force helps opening to meet ADA –Adds reinforcemnet to both door and frame
- 10 Year Warranty
Images courtesy of Design Hardware