Locksets

 

D1-Series Deadbolt Locks

Commercial and Residential Deadbolts

• Meets ANSI – A156.2, Grade 1 Standards
• UL Listed for “A” Label 3 Hour Fire Doors
• 2″ ADA Thumb turn Meets ADA & ANSI A117.1 accessibility codes
• Steel, Zinc dichromated chassis for Corrosion Resistance
• Steel Security Shield included to protect bolt from ice pick attack through door
• Free spinning Solid Steel cylinder collar resists wrenching and prying
• Non-Handed – Completely reversible
• 2 3/4″ fixed backset std. with 1 1/8″ x 2 1/4″ latchface, 2 3/8″ backset available with
• 1″ x 2 1/4″ latchface both with self adjusting front for square or beveled doors
• Solid Brass Deadbolt with 1″ Throw & Anti-Saw Hardened Steel Pin Insert
• 6 Pin Brass Cylinder, C Kwy, with 2 Keys (standard)
• Optional: Prepared for Small format IC core (less core)
• Optional: 11 popular competitor keyways available with replacement cylinders (extra charge applies)
• Note: Replacement cylinders are supplied loose and not installed in locksets
• Strike: 1 1/8″ x 2 3/4″ Square corner, Wood Frame Reinforcer & 3″ screws also included
• ANSI A115.2 – 2 1/8″ crossbore on doors
• Door Thickness: 1 3/4″ thick doors
• Finishes: US3 PVD*, US10B, US15, US26 PVD*, US26D (PVD = Lifetime Finish)
• Fasteners: combination screws for wood or metal doors & frames
• Limited Lifetime Warranty

---

M-Series Door Locks

• Meets & Exceeds ANSI – A156.13, Series 1000, Grade 1 Standards
• UL Listed for “A” Label 3 Hour Fire Doors, Singles or Pairs
• Meets ADA and ANSI A117.1 accessibility codes with lever trim
• Lock Case: Heavy Gauge Plated Steel, Zinc dichromated for Corrosion Resistance
• 5″ Full Length Levers are Forged Brass or Stainless Steel
• Trim Options: 2 1/4″ x 8 1/8″ Cast Escutcheon or 3″ Wrought Brass Roses
• Independent lever return springs to prevent lever sag
• Thru bolted Lever or Knob trim for increased security
• Handed as RHR – Easily Rehanded in the field
• 2 3/4″ backset
• Armored Front is Wrought Stainless Steel or Brass 1 1/4″ x 8″
• Stainless Steel 3 Piece Anti Friction Latch bolt with 3/4″ projection
• Non handed Stainless Steel Deadlocking Deadlatch
• 1″ Throw Deadbolt, Stainless Steel with a Anti-Saw Pins
• 6 Pin Brass mortise cylinder, C Kwy, with 2 Keys std, Prepared for Small format IC core (less core)
• Optional: 11 popular competitor keyways available with replacement cylinders
• Strike: 4 7/8″ x 1 1/4″ ASA non handed with large rectangular cut out
• 1 3/4″ Door Thickness Standard, other thicknesses available when specified
• Lever Styles: Flat (standard, shown above), Curved, Half Curved, Tubular, Ball Knob
• Finishes: US26D in stock with Flat lever
• Special Order Finishes: US3, US4, US10, US10B, US26, US32, US32D
• Fasteners: Combination screws for wood or metal doors & frames
• Electrified Options: 12 or 24 Volt (AC/DC) Fail Safe (Electrically Locked), Fail Secure (Electrically Unlocked), REX Request to Exit, LM – Latch Monitor, SM – Security Monitor of latch & solenoid
• Limited Lifetime Warranty

---

X-Series Door Locks

• Meets & Exceeds ANSI – A156.2, Series 4000, Grade 1 Standards
• UL Listed for “A” Label 3 Hour Fire Doors
• Meets ADA and ANSI A117.1 accessibility codes
• Steel, Zinc dichromated chassis for Corrosion Resistance
• Clutching levers standard for Vandal resistance on locking functions
• 5″ Solid zinc diecast levers, 3 3/8″ wrought brass roses
• Anti-sag mechanism with independent lever return springs to prevent lever sag
• Non-Handed – Completely reversible (S-A & S-B lever styles are handed)
• 2 3/4″ backset std. with 1 1/8″ x 2 1/4″ latchface, 2 3/8″ backset is available with
• 1″ x 2 1/4″ latchface both with self adjusting front for square or beveled edge doors
• Stainless Steel Latch bolt with 1/2″ projection, Deadlocking on keyed functions & exit latch
• 6 Pin Brass Cylinder, C Kwy, with 2 Keys (standard)
• Optional: Prepared for Small format IC core (less core)
• Optional: 11 popular competitor keyways available with replacement cylinders (extra charge applies)
• Note: Replacement cylinders are supplied loose and not installed in locksets
• Strikes: 4 7/8″ x 1 1/4″ ASA standard – T strike & Full lip strikes available when specified
• Door Prep: ANSI A115.2 – 2 1/8″ crossbore with (2) 3/8″ Thru bolt holes
• Removable Thru Bolts (Note: Thru bolts required for Grade 1 rating)
• Factory Set for 1 3/4″ Door thickness – 1 3/8″ require shims, can be adjusted to fit up to 2″ thick
• Flat (standard, shown above), Curved, Half Curved, S-A & S-B
• US3 PVD*, US4, US10B, US15, US26 PVD*, US26D (PVD = Lifetime Finish)
• Marine Grade 316 Stainless steel lever and rose cover upgrade available
• Fasteners: Combination screws for wood or metal doors & frames
• Limited Lifetime Warranty

---

Electrified Locksets Cylindrical & Mortise (special order)

• Operating Voltage: 12 or 24VAC/DC (+ or – 10%)
• Amperage: 612mA@12 / 330mA@24V
• Coil Resistance: 12V = 20 ohms / 24V = 73 ohms
• Power Consumption: 8 watts
• Features: – UL Listed – Continuous duty solenoids – Low current draw
• Options: – 12 or 24 Volt (AC/DC) – Fail Safe (Electrically Locked) or Fail Secure (Electrically Unlocked) – REX – Request to exit switch (REX) – LM – Latch Bolt Monitor – SM – Security Monitoring of Latchbolt and Solenoid
• Full 1 Year Warranty

Images courtesy of Design Hardware